Samsung A05 (SM-A055F) Test Point Image Download for FRP Unlock
The Samsung Galaxy A05 (SM-A055F) is a budget-friendly smartphone offering solid performance, but when it comes to bypassing FRP (Factory Reset Protection), things can get complicated. This comprehensive guide provides a high-quality Samsung A05 (SM-A055F) Test Point Image HD Download, helping technicians and mobile repair experts perform FRP unlock, flashing, or recovery tasks with ease.
In this detailed article, we will discuss everything about Samsung A05 Test Point, including its location, functions, tools required, step-by-step unlocking guide, and the HD Test Point image download link for your convenience.
What is a Test Point on Samsung A05 (SM-A055F)?
The Test Point is a crucial hardware contact area on the Samsung A05 motherboard that allows you to force the device into EDL (Emergency Download Mode) or Download Mode, especially when your phone is bricked, locked, or not recognized by flashing tools.
By using the Test Point, you can:
-
Bypass FRP lock easily.
-
Unbrick your Samsung A05 if it’s stuck in boot loop.
-
Flash stock firmware when the device cannot boot normally.
-
Access Qualcomm or Mediatek modes depending on chipset variant.
This process is particularly useful for technicians, mobile engineers, and advanced users who perform firmware-level repairs.
Samsung A05 (SM-A055F) Test Point Image HD Download
We provide a high-resolution Samsung A05 Test Point Image (HD) to help you clearly locate the contact points on the motherboard. This image is designed for FRP Unlock, flashing, or recovery mode access.
📥 Download Samsung A05 (SM-A055F) Test Point Image [HD Quality]
👉 Click Here to Download Test Point Image (Insert your official download link here)
This image is taken from an original Samsung A05 motherboard, ensuring accuracy for technicians performing board-level work. Make sure to zoom in carefully and identify the exact EDL Test Point before proceeding.
Tools Required for Samsung A05 FRP Unlock via Test Point
To perform FRP bypass or flashing using the Test Point method, you will need the following tools and files:
-
Samsung A05 Test Point Image (HD)
-
USB Data Cable (Original)
-
MTK Flash Tool / SP Flash Tool
-
Samsung A05 Stock Firmware (Official ROM)
-
MTK USB Drivers / Samsung USB Drivers
Make sure you’ve installed the required drivers and tools properly before starting the procedure.
Steps to Enter EDL Mode Using Samsung A05 Test Point
-
Power off your Samsung A05 completely.
-
Remove the back cover gently using a plastic prying tool.
-
Disconnect the battery connector from the motherboard.
-
Locate the Test Point pads using the HD Image provided above.
-
Connect one side of the tweezer to GND (ground) and the other side to the Test Point pad.
-
While holding the short, connect your device to PC via USB cable.
-
Your computer will detect the phone as a MediaTek USB Port or Preloader Port.
-
Release the short connection once the port appears in Device Manager.
-
You can now use SP Flash Tool or MRT Tool to flash firmware or bypass FRP.
How to Unlock FRP on Samsung A05 (SM-A055F) Using Test Point
After entering EDL Mode, follow these steps for FRP bypass:
-
Launch SP Flash Tool on your computer.
-
Load the scatter file from your Samsung A05 firmware.
-
Go to the Format tab.
-
Select Manual Format Flash.
-
Enter the FRP partition address (you can find this in the scatter file).
-
Wait for the process to finish successfully.
-
Disconnect the device and power it on.
Alternative FRP Unlock Methods for Samsung A05
If you’re not comfortable with hardware-level unlocking, try these software-based methods instead:
-
Samsung FRP Bypass Tools (like Easy Samsung FRP, SamFW Tool, or TFM Tool).
-
TalkBack & Accessibility Method (using Settings shortcut).
-
SIM PIN + Notification Method.
-
Using Odin Tool to flash combination firmware.
However, in most cases when the device is bricked or not booting, the Test Point method remains the most effective.